LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Door Lock Systems & Door Handles) >> Repair Instructions >> Door Lock Cylinder Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Do not attempt repairs in order to correct lock cylinder discrepancies. Replace the lock cylinder.
    Fig 1: View Of Door Handle Components
    GM1362834Courtesy of GENERAL MOTORS CORP.
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Remove the front door outside handle. Refer to Front Side Door Outside Handle Replacement .
  4. Remove the lock paw retaining clip (2).
  5. Remove the lock cylinder paw (3).
  6. Remove the lock cylinder (5) from the outside door handle.
scientia non olet · About LEMON Manuals