LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Rear Side Door Window Weatherstrip Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Weatherstrip - Rear Door Window
    GM1363725Courtesy of GENERAL MOTORS CORP.
  1. Install the window weatherstrip to the door
  2. Position the window weatherstrip to the window opening.
    1. Starting in the corners, position the window weatherstrip to the pinch-weld flange of the door frame.
    2. Working outward in both directions fitting the window weatherstrip.
  3. Inspect the operation of the window to ensure that the weatherstrip is properly positioned to the door frame.
  4. Close the rear door.
scientia non olet · About LEMON Manuals