LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Rear Side Door Window Channel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Window Run Channel - Rear Door
    GM1363689Courtesy of GENERAL MOTORS CORP.
  1. Install the window lower run channel (2) in the door.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the window lower run channel bolts (1).

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  3. Inspect the window for proper operation.
  4. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  5. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
scientia non olet · About LEMON Manuals