LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Rear Door Window Belt Inner Sealing Strip Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sealing Strip - Rear Door Window Belt Inner
    GM1362848Courtesy of GENERAL MOTORS CORP.
  1. Lower the window to the full down position.
  2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Lift the rear door window inner belt sealing strip off the pinch-weld flange.
  4. Remove the inner window belt sealing strip from the door.
scientia non olet · About LEMON Manuals