LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Front Side Door Window Belt Outer Sealing Strip Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sealing Strip - Front Door Window Belt Outer
    GM1363661Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to PAINT DAMAGE NOTICE .
  1. Apply masking tape to the door and applique.
  2. Lower the window to the full down position.
  3. Remove the outside rearview mirror. Refer to Power Mirror Replacement .
  4. Remove the outer belt sealing strip screw (2) located at the rear of the door.
    5. Fig 2: Releasing Outer Belt Sealing Strip Clip
    GM1385553Courtesy of GENERAL MOTORS CORP.
  5. Release the front outer belt sealing strip retaining clip, by inserting a suitable flat-bladed tool to the front edge and lift upward.
  6. Remove the outer belt sealing strip from the door.
scientia non olet · About LEMON Manuals