LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Front Side Door Window Belt Inner Sealing Strip Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Door Window Belt Inner Sealing Strip & Pinch-Weld Flange
    GM308134Courtesy of GENERAL MOTORS CORP.
  1. Position the window belt inner sealing strip to the door flange.

    Engage each end of the window belt inner sealing strip by pressing firmly onto the front and the rear ends of the pinch-weld flange.

    2. IMPORTANT:
    • Ensure the front end of the strip is inserted into the gap formed by the window weatherstrip and the door inner panel.
    • Ensure the rear end of the strip is flush to the rear leg of the window weatherstrip but not interfering with the path of the window.
  2. Firmly seat the entire length of the sealing strip.
  3. Inspect the window for proper operation.
  4. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
scientia non olet · About LEMON Manuals