LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Control System & Fuel System - 3.8L - Introduction (2 Of 2)) >> Repair Instructions >> Ignition Coil Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26) .
  2. Disconnect the spark plug wires from the ignition coil.
  3. Fig 1: View Of Ignition Coil Module & Module Mounting Bracket
    GM12299Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition coil screws (1).
  5. Remove the ignition coil (2).