Draining Procedure
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel fill cap.
- Install the J 42960-2 into the fuel fill pipe in order to hold the door open.
- Insert the J 45004 into the fuel tank until the hose reaches the bottom of the fuel tank.
- Use an hand or air operated pump device in order to drain as much fuel out through the fuel fill pipe as possible.
IMPORTANT:
Lubricate the fuel drain hose with J 36850
or equivalent to aid in hose insertion. See Special Tools . Do not use an unapproved lubricant.