Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering the open pipes and passages.

IMPORTANT: Always maintain cleanliness when servicing fuel system components.

Drain the fuel tank. Refer to Fuel Tank Draining .
Remove the fuel filler cap.

Fig 1: View Of Fuel Filler Pipe Screws

Courtesy of GENERAL MOTORS CORP.

Remove the fuel filler pipe screws from the fuel filler pocket.

Fig 2: Identifying Fuel Tank Components

Courtesy of GENERAL MOTORS CORP.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Loosen the fuel filler hose clamp (1) at the fuel filler pipe (2).

Fig 3: View Of Fuel Filler Pipe

Courtesy of GENERAL MOTORS CORP.

Remove the fuel filler pipe screw from the under body.
Remove the fuel filler pipe.