LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Control System & Fuel System - 3.8L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Hoses/Pipes Replacement - Engine/Chassis >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EVAP purge pipe into the fuel bundle.
    2. Fig 1: Identifying Pipe Routing
    GM189079Courtesy of GENERAL MOTORS CORP.
  2. Install the fuel hose/pipe bundle. Refer to Evaporative Emission Hoses/Pipes Replacement - Engine/Chassis .
scientia non olet · About LEMON Manuals