Fuel Sender Assembly

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Fuel Sender Assembly

Courtesy of GENERAL MOTORS CORP.

The fuel sender assembly consists of the following major components:

The fuel tank pressure (FTP) sensor (1)
The post not used (2)
The fuel feed (3)
The canister vent (4)
The fuel limiting vent valve (FLVV) (5)
The fuel level sensor (6)
The fuel pump and reservoir assembly (7)