LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Side Door Conduit Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Door Rubber Conduit
    GM164562Courtesy of GENERAL MOTORS CORP.
  1. Open the rear door.
  2. Remove the rubber conduit (1) from the center pillar.
  3. Disconnect the electrical connector.
  4. Remove the rubber conduit (1) from the door.