LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Compartment Lid Hinge Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear compartment.
  2. Use a grease pencil to mark the hinge to the rear compartment lid for the location at installation.
  3. Disconnect the lid harness in the rear compartment.
  4. Remove the rear compartment hinge to lid nuts. Refer to Rear Compartment Lid Replacement .
  5. Remove the rear compartment struts. Refer to Rear Compartment Lid Strut Replacement .
    6. Fig 1: Identifying Rear Compartment Hinge
    GM324455Courtesy of GENERAL MOTORS CORP.
  6. Use a grease pencil to mark the quarter panel hinge to the quarter panel. The mark will help you align the hinge at installation.
  7. Remove the bolts that attach the hinge to the rear quarter.
  8. Remove the hinge from the quarter panel.
scientia non olet · About LEMON Manuals