LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Rear Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open and support the hood.
    2. Fig 1: Identifying Plenum To Hood Weather Strip
    GM317839Courtesy of GENERAL MOTORS CORP.
  2. Starting at the center of the weatherstrip, pull the weatherstrip forward and pull the weatherstrip off of the flange.
  3. Remove the weatherstrip from the flange.
scientia non olet · About LEMON Manuals