LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Rear Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Plenum To Hood Weather Strip
    GM317839Courtesy of GENERAL MOTORS CORP.
  1. Align the weatherstrip to the flange.
  2. Starting at the passenger side corner, press the weatherstrip onto the flange. Work toward the center of the car.
  3. Close the hood.
scientia non olet · About LEMON Manuals