LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Open Assist Rod Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Upper End Assist Rods
    GM625128Courtesy of GENERAL MOTORS CORP.
  1. Install the upper end of the assist rods on to the ball joint on the hood.
    2. Fig 2: View Of Lower End Assist Rods
    GM625126Courtesy of GENERAL MOTORS CORP.
  2. Install the lower end of the assist rods on to the ball joint on the lower hood hinge
  3. Remove the support from the hood.
  4. Close the hood.
scientia non olet · About LEMON Manuals