LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Fuel Tank Filler Pipe Housing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fuel Filler Pocket Bolts
    GM490004Courtesy of GENERAL MOTORS CORP.
  1. Open the fuel filler door.
  2. Remove the fuel filler cap.
  3. Remove the bolts from the fuel filler pocket at the fuel filler neck.
    4. Fig 2: Identifying Fuel Filler Pocket
    GM490003Courtesy of GENERAL MOTORS CORP.
  4. Apply tape to the opening around the fuel filler pocket
  5. Remove the fuel filler pocket using a small flat-bladed tool, pressing down and out from the top edge of the fuel filler pocket.
scientia non olet · About LEMON Manuals