LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Fuel Tank Filler Door Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fuel Filler Door Components
    GM1538423Courtesy of GENERAL MOTORS CORP.
  1. Align the fuel filter door to the holes in the quarter panel.
  2. Install the rivets inside on the fuel filler door.
  3. Install the fuel filler pocket. Refer to Fuel Tank Filler Pipe Housing Replacement .
  4. Close the fuel filler door.
scientia non olet · About LEMON Manuals