LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Side Door Switch Harness Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Side Door Switch Harness
    GM1351826Courtesy of GENERAL MOTORS CORP.
  1. Position the harness to the trim panel.
  2. Press the harness connectors into the following switches:
    • The power rearview mirror switch (1)
    • The power door switch (2)
    • The power window switch (3)
    • The rear compartment lid switch (4)
  3. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
scientia non olet · About LEMON Manuals