LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Side Door Conduit Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Door Rubber Conduit
    GM308354Courtesy of GENERAL MOTORS CORP.
  1. Thread the electrical harness through the rubber conduit (1).
  2. Install the rubber conduit into the door.
  3. Connect the electrical connector.
  4. Install the rubber conduit to the front pillar.
  5. Close the front door