Fore/Aft Adjustment
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front fender insulator in order to gain access to the body side hinge bolts.
- Adjust the door fore and aft by repositioning the door as needed.
- Tighten the body side upper and lower hinge bolts.
Tighten: Tighten the bolts to 33 N.m (24 lb ft).
- Install the front fender insulator.
NOTE:
Refer to Fastener Notice
.