LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Fender Upper Diagonal Brace Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Fender Upper Diagonal Brace
    GM317801Courtesy of GENERAL MOTORS CORP.
  1. Install the front fender upper diagonal brace.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts to the front fender upper diagonal brace at the radiator support.

    Tighten:  Tighten the bolts to 47 N.m (35 lb ft).

  3. Install the front fender diagonal brace-to-inner fender bolt.

    Tighten:  Tighten the bolt to 47 N.m (35 lb ft).

  4. Close the hood.
scientia non olet · About LEMON Manuals