LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Fender Replacement

Front Fender Replacement

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Fender
GM1751809Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the front fender liner. Refer to Front Fender Liner Replacement .
1 Front Fender Nuts (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  8 N.m (70 lb in)
2 Fender Bolts (Qty: 1)

Tighten:  8 N.m (70 lb in)
3 Fender Bolts (Qty: 2)

Tighten:  8 N.m (70 lb in)
4 Fender Bolts (Qty: 3)

Tighten:  8 N.m (70 lb in)
5 Fender to Hood Hinge Bolts (Qty: 2)

Tighten:  25 N.m (18 lb ft)
6 Fender Assembly
scientia non olet · About LEMON Manuals