LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Lighting Systems) >> Diagnostic Information and Procedures >> Reading Lamps Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, press each overhead console reading lamp switch. The appropriate reading lamp should illuminate.
    • If the lamp does not illuminate, refer to Overhead Console Reading Lamp Circuit Malfunction in Circuit/System Testing .
  2. Press each dome/reading lamp switch. The appropriate dome/reading lamp should illuminate.
    • If the lamp does not illuminate, refer to Dome/Reading Lamp Circuit Malfunction in Circuit/System Testing .
  3. Press each rearview mirror reading lamp switch. The appropriate reading lamp should illuminate.
    • If the lamp does not illuminate, refer to Rearview Mirror Reading Lamp Circuit Malfunction in Circuit/System Testing .