LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Lighting Systems) >> Diagnostic Information and Procedures >> DTC B3948-B3951 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, command the appropriate turn signal lamp ON and OFF with a scan tool. The appropriate turn signal lamp should turn ON and OFF when changing between the commanded states.