LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Steering Wheel & Steering Column) >> Repair Instructions >> Tilt Lever Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Tilt Lever
    GM294334Courtesy of GENERAL MOTORS CORP.
  1. Push the tilt lever into the steering column.
  2. Enable the SIR system. Refer to SIR Disabling and Enabling .