LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (HVAC System - Automatic) >> Repair Instructions >> Ambient Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the ambient air temperature sensor electrical connector to the ambient air temperature sensor.
    2. Fig 1: Identifying Ambient Air Temperature Sensor
    GM1396623Courtesy of GENERAL MOTORS CORP.
  2. Align the retaining tabs (1) to the bottom side of the ambient air temperature sensor hole.
  3. Push upwards to install the ambient air temperature sensor to the vehicle.
  4. Install the upper air deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement .
scientia non olet · About LEMON Manuals