LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> O-Ring Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure.
    2. Fig 1: Identifying O-Ring Seals & A/C Refrigerant Component
    GM1252797Courtesy of GENERAL MOTORS CORP.
  2. Remove the O-ring seals from the A/C refrigerant component.
  3. Inspect the O-ring seals for signs of damage.
  4. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
    5. IMPORTANT: Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
  5. Cap or tape the A/C refrigerant components.
  6. Discard the O-ring seals.
scientia non olet · About LEMON Manuals