LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Condenser Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
  2. Remove the radiator. Refer to Radiator Replacement (L26, LY7) or Radiator Replacement (LS4) .
    3. Fig 1: View Of A/C Line Coupling At Condenser Tube
    GM1643649Courtesy of GENERAL MOTORS CORP.
  3. Remove the A/C line coupling from the condenser tube to evaporator tube. Refer to Air Conditioning Line/Tube Connector Removal/Replacement .
    4. Fig 2: Identifying A/C Compressor Hose Nut
    GM1615548Courtesy of GENERAL MOTORS CORP.
  4. Remove the A/C compressor line nut from the condenser and position the A/C compressor line aside.
  5. Remove the condenser from the vehicle.
  6. Remove and discard the O-ring seals and seal washer.
scientia non olet · About LEMON Manuals