LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement for the 3.8L engine or Air Cleaner Assembly Replacement for the 3.6L (LY7) engine or Air Cleaner Assembly Replacement for the 5.3L (LS4) engine.
  2. Disconnect the electrical connector from the A/C refrigerant pressure sensor.
    3. Fig 1: Identifying Refrigerant Pressure Sensor
    GM1642671Courtesy of GENERAL MOTORS CORP.
  3. Remove the refrigerant pressure sensor from the liquid line.
scientia non olet · About LEMON Manuals