LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Instrument Panel System Displays & Gages) >> Repair Instructions >> Electronic Compass Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Electronic Compass
    GM1204291Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Align the electronic compass to the openings in the rear shelf. Install the electronic compass.
  3. Install the sound barrier.
  4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
scientia non olet · About LEMON Manuals