LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Instrument Panel System Displays & Gages) >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Ambient Air Temperature Gage Sensor
    GM1357195Courtesy of GENERAL MOTORS CORP.
  1. Remove the radiator sight shield. Refer to Radiator Support Sight Shield Replacement .
  2. Disconnect the electrical connector from the ambient air temperature sensor (1).
  3. Release the tabs on the sensor and remove the ambient air temperature sensor (1) from the front fascia (2).
scientia non olet · About LEMON Manuals