LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Instrument Panel System Displays & Gages) >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Ambient Air Temperature Gage Sensor
    GM1357195Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the ambient air temperature sensor (1).
  2. Install the ambient temperature sensor (1) to the front fascia (2).
  3. Install the radiator sight shield. Refer to Radiator Support Sight Shield Replacement .
scientia non olet · About LEMON Manuals