LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Instrument Panel System Displays & Gages) >> Diagnostic Information and Procedures >> Engine Oil Pressure Indicator Always On (3.8L L26 and L32) >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

The engine oil pressure (EOP) switch is a normally closed switch that opens with the proper oil pressure. With the ignition switch turned ON and the engine not running, the powertrain control module (PCM) should detect a low signal voltage input. With the engine running, the pressure switch opens, and the PCM should detect a high signal voltage input. The PCM tests the state of the EOP signal circuit with the ignition switch turned ON, and the engine turned OFF. The instrument panel cluster (IPC) illuminates the EOP indicator when the IPC receives a serial data message from the PCM requesting the EOP indicator turned ON.

scientia non olet · About LEMON Manuals