LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Instrument Panel System Displays & Gages) >> Diagnostic Information and Procedures >> Engine Coolant Temperature Indicator Malfunction >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, verify that the engine coolant temperature indicator illuminates during the self test when the ignition is turned ON.
    • If the temperature indicator does not illuminate, replace the IPC.
  2. Ignition ON, verify that the scan tool Engine Coolant Temperature (ECT) Sensor parameter is within the temperature range shown on the engine coolant temperature gage.
    • If not within the temperature range on the gage, replace the IPC.
  3. If the temperature is normal, refer to Engine Overheating .
scientia non olet · About LEMON Manuals