LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Instrument Panel System Displays & Gages) >> Diagnostic Information and Procedures >> Driver Information Center (DIC) Switch Inoperative >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

The driver information center (DIC) switch is a multiplexed switch. Battery power is provided to the DIC switch via the instrument panel cluster (IPC) with the DIC switch signal circuit pulled up to battery voltage in the IPC. The switch input to the DIC is pulled low or grounded when a switch is activated. The IPC monitors the DIC switch signal circuit to determine the DIC switch inputs. Each switch state-SET/RESET, GAGES, TRIP ODOMETER, VEHICLE INFORMATION, FUEL-corresponds to a certain resistance value.