Installation procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sunshade Retainers

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Be sure to compress the sunshade guide to prevent the guide from breaking and ensure the guide properly engages the track.

From the outside of the vehicle, install one of the front sunshade guides into the sunshade track.

Fig 2: Compressing Rear Sunshade Guide

Courtesy of GENERAL MOTORS CORP.

Repeat step 1 to install the other front guide into the track.
Compress one of the rear sunshade guides and slide it into the track.
Ensure the sunshade is clear of the rear brace and install the remaining rear sunshade guide.

Fig 3: Pushing Sunshade

Courtesy of GENERAL MOTORS CORP.

Cycle the sunshade to ensure proper orientation.
Install the screws for the rear brace.

Fig 4: View Of Sunshade

Courtesy of GENERAL MOTORS CORP.

Install the sunroof window panel. Refer to Sunroof Window Replacement .