Action Taken When the DTC Sets
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- The PPS will set a DTC 056, and then communicate with the SDM via non class 2 circuit.
- The SDM will set DTC B0092.
- The SDM disables the instrument panel (I/P) module deployment loop.
- The PPS will turn ON the passenger air bag status OFF indicator.
- The SDM commands the AIR BAG indicator ON via serial data communications.