Action Taken When the DTC Sets

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

The PPS will set a DTC 034, and then communicate with the SDM via non class 2 circuit.
The PPS will also set DTC 056 indicating a PPS internal system fault has occurred until the re-zeroing procedure was performed.
The SDM will set DTC B0092.
The SDM disables the I/P module deployment loop.
The PPS will turn ON the passenger air bag status OFF indicator.
The SDM commands the AIR BAG indicator ON via serial data communications.