Muffler Replacement (3.6L LY7)
Muffler Replacement (3.6L LY7)
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedure: Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
. |
|
| 1 | Retaining Nuts (Qty: 2). Tighten: Tighten to 45 N.m (33 lb ft). Tip: Use a utility jack to support the exhaust system. |
| 2 | Catalytic Convertor Gasket. Tip: DO NOT re-use the gasket, replace with NEW. |
| 3 | Front Insulator. Tip: If the insulator is found to be worn or damaged, replace the insulator. |
| 4 | Intermediate Insulator. Tip: If the insulator is found to be worn or damaged, replace the insulator. |
| 5 | Muffler/Exhaust System. Tip:
|
| 6 | Rear Insulator (Qty: 4). Tip: If the insulators is found to be worn or damaged, replace the insulator. |