Instrument Panel Cluster Trim Plate Bezel Replacement
Instrument Panel Cluster Trim Plate Bezel Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications . |
|
| 1 | Instrument Panel Cluster Bezel Screws (Qty: 1) Tip: The screw can be accessed by opening the instrument panel compartment. Tighten: 2 N.m (18 lb in) |
| 2 | Instrument Panel Cluster Trim Plate Tip: Pull the trim plate away from the instrument panel far enough to disconnect the headlamp switch electrical connector, then remove from the vehicle. |
| 3 | Cluster Trim Panel Nut (Qty: 1) |
| 4 | Instrument Panel Cluster Trim Plate Clips (Qty: 4) |