LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory >> Removal Procedure

Removal Procedure

  1. Remove the screws from the bottom of the I/P accessory trim plate.
    Fig 1: I/P Accessory Trim Plate
    GM326098Courtesy of GENERAL MOTORS CORP.
  2. Pull the I/P accessory trim plate rearward in order to release the retaining clips.
  3. Rotate the I/P accessory trim plate rearward and up in order to release the 2 tabs at the top edge.
  4. Disconnect the ash tray harness electrical connector from the I/P harness.
  5. Remove the I/P accessory trim plate.