LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 5 Of 5) >> Off-Vehicle Repair Instructions - Part 4 >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

    Fig 1: Locating Drive Belt Tensioner Bracket Bolts
    GM1395909Courtesy of GENERAL MOTORS CORP.
  1. Place the left drive belt tensioner in position to the engine front cover.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the left drive belt tensioner bracket bolts.

    Tighten:  Tighten the left drive belt tensioner bracket bolts to 23 N.m (17 lb ft).

scientia non olet · About LEMON Manuals