LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 4 Of 5) >> Off-Vehicle Repair Instructions - Part 3 >> Oil Pump Installation

Oil Pump Installation

    Fig 1: View Of Oil Pump & Mounting Bolts
    GM902821Courtesy of GENERAL MOTORS CORP.
  1. Align the oil pump gerotor with the crankshaft flats and install the oil pump to the engine block.
  2. Align the pump body with the mounting holes in the cylinder block.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the oil pump bolts.

    Tighten:  Tighten the oil pump bolts to 23 N.m (17 lb ft).