LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 4 Of 5) >> Off-Vehicle Repair Instructions - Part 3 >> Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation

  1. Install a NEW O-ring on the oil level indicator tube.
    2. Fig 1: Identifying Oil Level Indicator & Tube
    GM1395941Courtesy of GENERAL MOTORS CORP.
  2. Install the oil level indicator and tube by sliding the tube down through the lower crankcase hole.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the oil level indicator tube bracket bolt.

    Tighten:  Tighten the oil level indicator tube bracket bolt to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals