LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 3 Of 5) >> Off-Vehicle Repair Instructions - Part 2 >> Valve and Seat Grinding >> Valve Visual Inspection Procedure

Valve Visual Inspection Procedure

    Fig 1: Identifying Inspection Points For Valves Damage
    GM156174Courtesy of GENERAL MOTORS CORP.
  1. Inspect the valve for damage from the head to tip for the following conditions:
    • Pitting in the valve seat area (1)
    • Lack of valve margin (2)
    • Bending in the valve stem (3)
    • Pitting or excessive wear in the stem (4)
    • Worn valve key grooves (5)
    • Worn valve tip (6)
  2. Replace the valve if any of these conditions exist.
scientia non olet · About LEMON Manuals