LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 3 Of 5) >> Off-Vehicle Repair Instructions - Part 2 >> Valve and Seat Grinding >> Valve Margin Measurement Procedure

Valve Margin Measurement Procedure

    Fig 1: View Of Valve Margin Measurement
    GM57502Courtesy of GENERAL MOTORS CORP.
  1. Measure the valve margin using an appropriate scale.
  2. Reference the specifications in this section for minimum valve margin and compare them to your measurements.
  3. If the valve margins are beyond specification, replace the valves.
  4. If the valve margins are within specification and do not require refacing, test the valve for seat concentricity using the Valve-to-Seat Concentricity Measurement Procedure.
scientia non olet · About LEMON Manuals