LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 3 Of 5) >> Off-Vehicle Repair Instructions - Part 2 >> Intake Manifold Disassemble >> Upper to Lower Intake Manifold Disassemble Procedure

Upper to Lower Intake Manifold Disassemble Procedure

    Fig 1: Upper-To-Lower Intake Manifold Bolts
    GM1531017Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not reuse the upper-to-lower intake manifold gasket and the intake manifold-to-cylinder head sealing gaskets.
  1. Remove the upper-to-lower intake manifold bolts.
    2. Fig 2: Fuel Rail Feed Hose Bracket Bolts
    GM1531021Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel rail feed hose bracket bolts from the upper intake manifold.
    3. Fig 3: Fuel Injector Wiring Harness Bracket Bolt
    GM1531023Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel injector wiring harness bracket bolt from the upper intake manifold.
    4. Fig 4: Upper Intake Manifold And Lower Intake Manifold
    GM1531026Courtesy of GENERAL MOTORS CORP.
  4. Remove the upper intake manifold from the lower intake manifold.
    5. Fig 5: Upper-To-Lower Intake Manifold Gaskets
    GM1531028Courtesy of GENERAL MOTORS CORP.
  5. Remove and discard the upper-to-lower intake manifold gaskets.
scientia non olet · About LEMON Manuals