LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 3 Of 5) >> Off-Vehicle Repair Instructions - Part 2 >> Engine Block Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

  1. Remove any old thread sealant, gasket material or sealant using J 28410  .
  2. Clean all the following areas with solvent:
    • Sealing surfaces
    • Cooling passages
    • Oil passages
    • Bearing journals
  3. Clean all threaded and through holes with solvent.
    4. CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.
  4. Dry the engine block with compressed air.
scientia non olet · About LEMON Manuals