LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 3 Of 5) >> Off-Vehicle Repair Instructions - Part 2 >> Crankshaft and Bearings Removal >> Crankshaft End Play Measurement

Crankshaft End Play Measurement

  1. Place a dial indicator at the crankshaft nose.
  2. Gently force the crankshaft to the extreme front and rear positions with a pry tool while monitoring the movement of the dial indicator.
  3. The crankshaft end play should not exceed specifications. Refer to Engine Mechanical Specifications .
  4. If the specifications are exceeded inspect the thrust bearing thrust OD and the crankshaft thrust wall for wear and/or excessive runout. Refer to Engine Mechanical Specifications .
  5. Replace the thrust bearing or crankshaft as necessary.
scientia non olet · About LEMON Manuals